FREE SHIPPING AUSTRALIA WIDE!

Makita 3 Piece 40V Max 4.0Ah Combo Kit DK0140G301

Makita 3 Piece 40V Max 4.0Ah Combo Kit DK0140G301

Regular price $1,299.00

Unit price per 

only 0 left in stock

Bonus until 31 August 2020 - Makita 18V Battery Adaptor for XGT Charger (ADP10) 191C11-5

Makita 40V Max Hammer Driver Drill HP001GZ

Features:

  • Drilling Modes - screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141 Nm max. torque. Hammer Drilling mode (rotation with hammering) for drilling in masonry up to a maximum 20 mm hole diameter.
  • Active Feedback Sensing Technology (AFT) sensors shut down the tool in the event of a kickback providing user protection. If the bit rotation is suddenly forced to stop such as the bit jamming the motor automatically shuts down.
  • Electronic Clutch - jog wheel with digital display allows for setting the selected torque quickly and easily. With 41 settings in low speed (1-45 Nm) and 21 settings in high speed (1-10 Nm).
  • Mechanical speed control with an increase of the drilling speed (2,600 rpm) on both models they are able to drill 35% faster than the equivalent 18V model.
  • Compact Overall Length for improved handling and control the overall length has been reduced by 23 mm vs. the 18 V equivalent.
  • High Power Output - the high power 40 V max XGT Li-Ion battery allows for continuous operation in heavy duty applications such as drilling with self-feeding bit or auger bit
Specifications:
Voltage 40V Max
Max. drilling capacities in wood Auger bit: 50 mm
Self feeding bit: 76 mm
Hole saw: 152 mm
Max. drilling capacities in steel 20 mm
Max. drilling capacities in masonry 20 mm
No load speed Hi: 0 - 2,600 rpm
Lo: 0 - 650 rpm
Impact rate Hi: 0 - 39,000 ipm
Lo: 0 - 9,750 ipm
Max. peak torque 141 Nm
Max. tightening torque Hard: 140 Nm
Soft: 68 Nm
Length 182 mm
Weight 2.0 kg
Makita 40V Max Impact Driver TD001GZ

Features:

  • Enhanced Anvil Holder - material change from needle bearing to ball bearing provides reduction of bit wobbling. Providing more stability and control when fastening.
  • Quick Change Selector - one touch mode selector located above the trigger allows the user to jump between modes single handed. Quickly changing between modes improves efficiency as you no longer have to take your hand off the tool.
  • Constant Speed Control ensures the users is able to operate the tool at the same speed that you would operate the tool on a full charged battery, even when the remaining battery capacity becomes low.
  • One Touch Bit Installation - new bit installation has been designed to prevent the bit from unexpectedly falling off. A more effective mechanism has been designed increasing the strength of the chuck without increasing the resistance required to install a bit.
  • 6 Optimised Application Modes - 6 assist mode variations; T-mode 1 and 2 for self-drilling screws in both thick and thin sheet metal. Wood mode for fastening long wood screws. Bolt modes 1 to 3 with rotation auto stop for tightening / loosening bolts.
  • 4 Speed Power Selection - 4 electronic speeds allow the user to adjust the power, speed and impact rate to suit the fastening application.
  • High Power Output - the high power 40Vmax XGT Li-Ion battery allows for continuous operation in heavy duty applications such as metal fastening screws or coach bolts.
Specifications:
Voltage 40V Max
Max. capacities standard bolt M5 - M16
Max. capacities high tensile bolt M5 - M14
No load speed Max.: 0-3,700 rpm
Hard: 0-3,200 rpm
Med: 0-2,100 rpm
Soft: 0-1,100 rpm
Impact rate Max.: 0-4,400 ipm
Hard: 0-3,600 ipm
Med: 0-2,600 ipm
Soft: 0-1,100 ipm
Max. tightening torque Max.: 220 Nm
Hard: 170 Nm
Med: 50 Nm
Soft: 20 Nm
Drive shank 6.35 mm (1/4") Hex
Length 120 mm
Weight 1.0 kg
Makita 40V Max 125mm (5") Angle Grinder, Slide Switch GA005GZ

Features:

  • Switch Design - features the slide switch design. The grip circumference has been reduced for more comfortable handling.
  • Active Feedback Sensing Technology (AFT) - sensors shut down the tool in the event of a kickback providing user protection. If the wheel rotation is suddenly forced to stop such as the wheel jamming the motor automatically shuts down.
  • Tool less Wheel Cover allows for fast and easy adjustment and installation / removal of wheel cover, for swapping to optional cutting or dust collection guards.
  • High Power Output - the high power 40 V max XGT Li-Ion battery allows for continuous operation in heavy duty applications. Maximum power output is 40% higher than the 18V equivalent.
  • High Durability - advanced protection against heat and dust ensure the tool can run for longer in heavy duty applications without overheating. Whiles improvements have also been made to bearing and switch components to ensure long term durability
  • Electric Brake maximises productivity and user safety by rapidly slowing the wheel rotation after the switch has been released.
  • Soft Start / Anti Restart - wheel starts slowly then rapidly accelerates to maximum speed to reduce the initial start up shock. Anti restart restricts the tool from starting if the trigger is depressed when a battery is installed.
Specifications:
Voltage 40V Max
Wheel diameter 125 mm (5")
Switch Type Slide
Electric Brake Yes
No load speed 8,500 rpm
Length 410 mm
Weight 2.2 kg
Makita 40V Max 4.0Ah Battery (BL4040) 191B26-6

Features:

  • Built tough - High durability features specifically designed for XGT
  • Shock absorbing structure
  • High Rigidity Battery Rails - Durable slide in battery rail holds the battery and tools firmly to withstand high powered products
  • Terminal shot-circuit prevention structure - The protection wall is positioned between terminals to protect them from water and dust
  • Triple-layer Waterproof Structure - Prevents cell failure due to water and dust
Specifications:
Voltage 40V Max
Amp 4.0 Ah
Weight 1.0 kg
Makita 40V Max Rapid Charger (DC40RA) 191E09-4

Features:

  • Optimum Charging System - Rapid optimum charge is achieved by feeding real time data of the battery being charged with the charging control system . Data such as battery condition and cell temperature are communicated to optimise the charge
  • Dual cooling fans - One for the battery and one for the charging circuit. This enable the charger to fully charge all batteries in the same charging time without slowing down due to a heat increase
  • New charging status indicator light - The enlarged and raised LED light provides clearer indication of charging status.
  • Compatible with LXT Li-Ion Batteries - ADP10 was developed for use with the DC40RA to rapid charge 18V batteries faster then ever before
Specifications:
Voltage 40V Max
Charge time 45 mins (BL4040)
28 mins (BL4025)
40 mins (BL1860B using APD10)
Weight 1.0 kg

Shipping Information

Open tab

All our orders are carefully packaged and shipped with Australia Post. 

PROCESSING TIMES 

Your order will be processed within 1-2 Business days. Most orders are shipped within 1 business day. 

SHIPPING TIMES (AUSTRALIA) 

Standard 1-5 Business Days 

Express 1-3 Business Days 

Returns Policy

Open tab

Returns
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Please note. All returns for simple change of mind, the customer (you) must pay the shipping cost.

Additional non-returnable items:
Gift cards

To complete your return, we require a receipt or proof of purchase.

Please do not send your purchase back to the manufacturer.

Any item not in its original condition, is damaged or missing parts for reasons not due to our error will not be refunded.
Any item that is returned more than 30 days after delivery

Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.

Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at info@toolboss.com.au.

Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at info@toolboss.com.au and send your item to: Tool Boss, 1/704 Ingham Road, Bohle , Townsville QLD 4814, Australia.

Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.

If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return.

Shipping
To return your product, you should mail your product to: Tool Boss, 1/704 Ingham Road, Bohle , Townsville QLD 4814, Australia

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

Close (esc)

MONTHLY GIVE AWAY

“Score a slab of your choice when you sign up. We’re giving away one a month’’

You must be 18 yrs or older to enter the draw.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Shopping Cart

Your cart is currently empty.
Shop now