FREE SHIPPING AUSTRALIA WIDE ON ORDERS OVER $99!!*

Makita 18V Brushless 3 Piece 5.0ah Combo DLX3150TX1
Makita 18V Brushless 3 Piece 5.0ah Combo DLX3150TX1
Load image into Gallery viewer, Makita 18V Brushless 3 Piece 5.0ah Combo DLX3150TX1
Load image into Gallery viewer, Makita 18V Brushless 3 Piece 5.0ah Combo DLX3150TX1

Makita 18V Brushless 3 Piece 5.0ah Combo DLX3150TX1

Regular price $1,039.00

Unit price per 

FREE SHIPPING ON ORDERS OVER $99!*

Only $5.00 Shipping For Orders Under $99!

Bonus via redemption until June 30 Visit www.makita.com.au for more info
Makita 18V Brushless Heavy Duty Hammer Driver Drill DHP486Z

Features:

  • Compact Design for improved handling and control the overall length has been reduced by 27 mm vs. the previous model
  • 3 Drilling Modes - screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141 Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 16 mm hole diameter.
  • LED Joblight - high brightness twin LED joblight with pre glow and after glow functions. Illuminating the working area for greater visibility during application
  • High Power Output - This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy duty applications.
  • 2 Speed Mechanical Gearing - high speed mode produces 2,100 rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.
  • All metal gear construction - allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come.
  • XPT Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability.
Specifications:
Voltage 18 V
Max. drilling capacities in wood Auger bit: 50 mm
Self-feeding bit: 76 mm
Hole saw: 152 mm
Max. drilling capacities in steel 13 mm
Max. drilling capacities in masonry 16 mm
No load speed Hi: 0 - 2,100 rpm
Lo: 0 - 550 rpm
Impact rate Hi: 0 - 31,500 ipm
Lo: 0 - 8,250 ipm
Max. peak torque 141 Nm
Max. tightening torque Hard: 130 Nm
Soft: 65 Nm
Length 178 mm
Weight 2.1 kg
Makita 18V Brushless 1/2" Impact Wrench DTW300Z

Features:

  • Twin LED Job light with pre glow and after glow function to illuminate workpiece.
  • Variable speed control via trigger - impact selection speed can be controlled via the trigger providing the user with optimum control.
  • Electronic 4 stage impact selection - Max/Hard/Medium/Soft impact power can be selected to suit the application, simply by pushing a button.
  • Forward & Reverse Automatic Stop, with 6 modes for customized applications for greater control and convenience.
  • Trigger Switch with quick trigger mode engages immediate full speed.
  • Ergonomic Handle designed to maximise thrust to the bit as well as increasing control.
  • eXtreme Protection Technology enhanced protection from dust and moisture, enabling safe use in outdoor applications and harsh environments.
Specifications:
Voltage 18V
Max. capacities standard bolt M10 - M20
Max. capacities high tensile bolt M10 - M16
No load speed Max: 0-3,200 rpm
High: 0-2,600 rpm
Med: 0-1,800 rpm
Soft: 0-1,000 rpm
Impact rate Max: 0-4,000 ipm
High: 0-3,400 ipm
Med: 0-2,600 ipm
Soft: 1,800 ipm
Max. fastening torque Max: 330 Nm
Hard: 180 Nm
Medium: 130 Nm
Soft: 70 Nm
Nut busting torque 580 Nm
Drive shank 12.7 mm (1/2") Square
Overall length 144 mm
Weight 1.2 kg
Makita 18V Brushless Electric Brake Angle Grinder Paddle Switch DGA508Z

Features:

  • BL Brushless Motor - provides more power and longer run times
  • Electric brake
  • Kick back detection
  • Automatic Torque Drive - automatically increases torque when cutting through harder material
  • Anti restart function
Specifications:
Wheel size: 125 mm
No load speed: 8,500 rpm
Overall length: 362 mm
Weight: 2.6 kg
Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L

Features:

  • Star Protection
  • Battery Fuel Gauge
  • Multi-contact slide type terminal
  • Protective gel coating
  • Active 3 Controls current, voltage and thermal temperature
  • Shock absorbing construction
  • The fastest charge times in the industry
  • Intelligent battery & charger communication system
  • Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
  • Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
  • Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
  • Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
  • Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
  • Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
  • Up 66% more run time than BL1830*
  • 4-Stage battery fuel indicator
  • 45 minute charge time
Specifications:
Voltage 18V
Dimensions LxWxH 11 x 8 x 6.5 cm
Weight 0.63 Kg
Makita Active 7.2-18V Li-Ion Rapid Charger DC18RC 195589-2

Features:

  • Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
  • Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
  • Forced air cooling fan - cools the battery to minimise charging time
  • Digital power display identifies the condition of the battery and charging condition
Specifications:
Cell Capacity 1.5-5.0 Ah
Charge Time 15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)
Net Weight 820 g
Overall Length 185 mm
Voltage 18 V

    Shipping Information

    Open tab

    All our orders are carefully packaged and shipped with Australia Post. 

    PROCESSING TIMES 

    Your order will be processed within 1-2 Business days. Most orders are shipped within 1 business day. 

    SHIPPING TIMES (AUSTRALIA) 

    Standard 1-5 Business Days 

    Express 1-3 Business Days 

    Returns Policy

    Open tab

    Returns
    Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

    To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
    Please note. All returns for simple change of mind, the customer (you) must pay the shipping cost.

    Additional non-returnable items:
    Gift cards

    To complete your return, we require a receipt or proof of purchase.

    Please do not send your purchase back to the manufacturer.

    Any item not in its original condition, is damaged or missing parts for reasons not due to our error will not be refunded.
    Any item that is returned more than 30 days after delivery

    Refunds (if applicable)
    Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
    If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.

    Late or missing refunds (if applicable)
    If you haven’t received a refund yet, first check your bank account again.
    Then contact your credit card company, it may take some time before your refund is officially posted.
    Next contact your bank. There is often some processing time before a refund is posted.
    If you’ve done all of this and you still have not received your refund yet, please contact us at info@toolboss.com.au.

    Exchanges (if applicable)
    We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at info@toolboss.com.au and send your item to: Tool Boss, 1/704 Ingham Road, Bohle , Townsville QLD 4814, Australia.

    Gifts
    If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.

    If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return.

    Shipping
    To return your product, you should mail your product to: Tool Boss, 1/704 Ingham Road, Bohle , Townsville QLD 4814, Australia

    You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

    Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

    If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

    Close (esc)

    MONTHLY GIVE AWAY

    “Score a slab of your choice when you sign up. We’re giving away one a month’’

    You must be 18 yrs or older to enter the draw.

    Age verification

    By clicking enter you are verifying that you are old enough to consume alcohol.

    Search

    Shopping Cart

    Your cart is currently empty.
    Shop now